Moulds for thermoforming of sanitary wares
Mould for thermoforming of an angular bathtub, cast technology
Mould for thermoforming of a rectangular bathtub, cast technology
In 2001 we extended production area of our company, which allowed us to start large-size mould production. We established pattern-shop department, where we would develop bathtub and paddling pool models according to our Customers' own ideas.
We use two technologies to make our moulds:
- "Cast" moulds reinforced inside with steel structure - in most cases these are deep paddling pools.
- Laminated moulds reinforced inside with glass material - in most cases these are moulds used in bathtub production.
Both, working surface of the mould and its entire body, are made of high quality resin manufactured in western countries, which has following properties:
- High mechanical strength
- Minimum contraction
- Thermal strength: Tg - 180°C - prior to delivery to the Customer moulds are thermally hardened in specially designed heating furnace.
- High surface smoothness
- Owing to high aluminium dust content in resin, the mould characteristic is high thermal conductivity.
Finished mould is equipped with an internal cooling / heating system and suction system. Repeated checks of condition of moulds being used by our Customers confirm that they are not worse than conventional aluminium moulds.
The only difference is their PRICE.
Mould for thermoforming of a bathtub which has a metallized surface, cast technology
Mould for thermoforming of an angular bathtub, cast technology
Mould for thermoforming of an angular bathtub, cast technology
Mould for thermoforming of a padding pool, cast technology
Mould for thermoforming of a rectangular bathtub, cast technology
Mould for thermoforming of an angular bathtub, cast technology
Mould for thermoforming of a panel of an angular bathtub , cast technology
Mould for thermoforming of a panel for an angular bathtub , cast technology
Mould for thermoforming of an angular bathtub, cast technology
Mould for thermoforming of a rectangular bathtub, laminate technology
Mould for thermoforming of an angular bathtub, laminate technology
Mould for thermoforming of a panel, laminate technology
Mould for thermoforming of a sauna rooflet, laminate technology..
Mould for thermoforming of a sauna padding pool , laminate technology.
Mould for thermoforming of a sauna main panel
Mould for thermoforming of an angular bathtub.
Mould for thermoforming of an angular bathtub.
Mould for thermoforming of an angular bathtub.
Mould for thermoforming of an angular bathtub.
Mould for thermoforming of an angular bathtub.
Mould for thermoforming of an angular bathtub.
Mould for thermoforming of an angular bathtub.
Mould for thermoforming of an angular bathtub.
Mould for thermoforming of an angular bathtub , cast technology
Mould for thermoforming of an angular bathtub.
Mould for thermoforming of a rectangular bathtub
Mould for thermoforming of an angular bathtub.
Mould for thermoforming of a rectangular bathtub
Mould for thermoforming of an angular bathtub.
Mould for thermoforming of a padding pool
Mould for thermoforming of a padding pool
Mould for thermoforming of an angular bathtub.
Mould for thermoforming of an angular bathtub.
Mould for thermoforming of a rectangular bathtub
Diestamping of a padding pool 80x80
Mould for thermoforming of a padding pool 80x80
Mould for thermoforming of an angular bathtub., technologia laminatu
Moulds for thermoforming of sanitary wares
Execution of models of the wares
Moulds for thermoforming of other wares
Moulds for polyurethane foaming
Moulds for paraffin cast
Flexible moulds
Moulds for production of polyurethane undersides
Rapid prototyping
Holders of CNC
Spray metallization
34-100 Wadowice
ul. Błonie 1, POLAND
tel/fax: +48 33 873-45-80
Start»
| About Lokas»
| References»
| Contact»
| Site map»
| Moulds for thermoforming of sanitary wares»
| Execution of models of the wares»
| Moulds for thermoforming of other wares»
| Moulds for polyurethane foaming»
| Moulds for paraffin cast»
| Flexible moulds»
| Moulds for production of polyurethane undersides»
| Rapid prototyping»
| Holders of CNC»
| Spray metallization»
| kredyt gotówkowy |